*** The 3.1Mhz unit is our most popular unit. We usually have several 3.1MHz units IN-STOCK. ***

The sideband generator combines an internal oscillator signal with an external low frequency (50Hz to 150khz) sine wave and generates an output consisting of a carrier wave with many sidebands which are harmonics of the external input.

This is a pre-built solid state unit which is not user adjustable.

3.10Mhz Sidebands

Spectral output from a 3.10Mhz Sideband Generator with a sinewave input of ~35khz.

The output is not directly suitable for speech or audio but may have other uses.

A wealth of information on various topics may be found at Tom Bearden's site www.cheniere.org.

 

See the Details tab for wiring diagram and hookup information

ITEMS NOT INCLUDED BUT REQUIRED FOR OPERATION:

Operating the Sideband Generator requires an external battery (not a power supply or wall-wart) and a function generator and varying cables depending on your use:

HPG1 Function Generator *
   
12V Lithium Battery Pack *

Advanced researchers may be interested in the following, but they are NOT REQUIRED to operate the sideband generator.

Rigol DSA815 Analyzer *
(Trigger option is not needed)
   
BK Precision 4013B *
Precision Function Generator


NOTE: This device is designed to allow experimentation and/or research of sideband frequencies.

* It is not practical for us offer these items at competitive pricing with online retailers, so we are providing these external links to pass some cost savings on to you. We do receive a small referral fee for items purchased from these links, but this does not raise your price and you may purchase these items elsewhere if desired.


ONLY RUN THIS DEVICE FROM A 12V LITHIUM BATTERY. DO NOT USE A POWER SUPPLY OR WALL WART OR THEY MAY BE DAMAGED.

  
HPG1 Function Generator *
12V Lithium Battery Pack *